Ways to Diagnose Automobile Difficulty With an Analyzer 1Open the driver's side door of your car or truck. Considering the fact that 1996, automobiles made for the American marketplace have utilized a standardized On-Board Diagnostics (OBD) system. This implies that every automobile manufactured given that 1996 is readable by most diagnostic analyzers applied by expert mechanics too as these offered to shoppers.
The D-style GM MDI, plug-in connector for any diagnostic analyzer is normally situated underneath the driver's console in or about the fuse box. Refer to the owner's manual for the automobile to help locate the plug-in connector for the scanner.2Turn on the diagnostic auto scanner and plug it in to the D-style plug-in connector. Adhere to the prompts on the scanner and press the "Check" button. Diverse scanners will operate with slight variations. Turn the important within the ignition to the "Accessories" position. Wait two to 5 minutes for the scanner to read the code(s) displayed by the vehicle.
Some lower-end scanners could call for you to connect the scanner to a laptop through a USB port. Based on CarsDirect.com, a Palm Pilot will usually operate to help study the code from the scanner.3Look up the diagnostic trouble code on the web if your code reader will not possess the capability to display the problem. Some scanners that happen to be extra high priced are going to be able to tell you what the problem is too because the code that goes together with the problem.4Clear the code out of your car just after producing the important repair. In the event the codes or perhaps a "Check Engine Light" reappears following driving the automobile a handful of miles auto diagnostics software, the problem has not been resolved and will want to be looked at once more.
Related articles:
没有评论:
发表评论