Obd2 scanner

The best way to Connect My Scan Tool 1Plug the connection cable into the scan tool. The cable comes with all the tool and plugs into the bottom on the unit.2Locate the automobile DLC connector. Obd2 scanner

The connector is located under the automobile dash on the driver side on the steering wheel column for regular automobiles. For heavy-duty autos, the connector is discovered behind the driver side kick panel. Lift the kick panel out towards you and you will see the connector.3Plug the cable from the scan tool in to the connector. You can hear the cable click into location. The scan tool is now connected and prepared for use. Comply with the manufacturer's directions on utilizing the specific scan tool. The best way to Connect an MT 2500 to a 2001 Jetta 1Bring the MT2500 towards the Jetta.

Sit inside the driver's seat and insert the ignition essential. Turn the important to "Run" or "On."2Examine the region beneath the reduce steering column panel Auto diagnostics, close to the left edge of the center console. Uncover the OBD-II port. The port is rectangular. It is actually the precise exact same size because the connection port coming from the MT2500.3Plug the MT2500's connection port in to the OBD-II port. Push the "Power" switch on the MT2500 to turn it on and to connect using the Jetta's on-board diagnostics technique.

Related articles:

• GM MDI Interface For five to eight years
• GM MDI Scan tool In addition
• GM MDI Interface First