How you can Reboot the BCM on My 2001 Saturn L Series 1Shift the Saturn's transmission into park or 1st gear (manual) and turn off the engine. Set the parking brake and turn the ignition switch back towards the "On" position.
2Plug a scan tool into the Saturn's diagnostic data port. This port is positioned underneath the dashboard area just above the brake and gas pedals.3Turn on the scan tool and wait a moment for it to boot up. Select "BCM" from the primary screen. Pick out the "Codes" option from the BCM menu Auto code scanner. Choose "Clear all present and stored DTCs." car diagnostic tool;
4Wait for the scan tool to indicate that the codes are cleared. Disconnect the scan tool from the car and start the engine. Examine to make sure that the "Service Vehicle" light is no longer illuminated.
Related articles:
没有评论:
发表评论