Ways to Replace a Honda Accord Passenger Air Bag 1Pop open your Honda's hood and disconnect the negative cable from the battery. This may stop the new air bag from accidentally deploying through installation.2Locate your fuse panel beneath the dash on the driver's side.
Open it and check out the diagram to locate the slot together with the air bag fuse. Pull the air bag fuse out to deactivate the air bags for safety for the duration of replacement.3Open your glove box and unhook every strap inside to take away the glove box door. Use the screwdriver to unscrew and get rid of the glove box itself. This may offer you access towards the passenger side air bag inside the dash GM MDI.
4Unscrew the old air bag and pull it out till you see the wires behind it. Unplug the air bag from the vehicle's wiring harness to eliminate it. Plug the new air bag's wires into the harness. Screw it in location Auto diagnostics. Slide the glove box back in to the dash and screw it in securely. Reattach the straps for the glove box door and close it.5Replace the air bag fuse within the fuse panel once more. Reconnect the unfavorable battery cable for the battery.
Related articles:
没有评论:
发表评论