Ways to Reset the Check Engine Light within a 1999 Ford Mustang 1Move the driver's seat for the far rear position to offer oneself far more space to operate Auto diagnostic tools.2Look beneath the dash close to the center and discover the covering that has to be removed to access the panel for the OBD II connection.
It's connected to the correct side with the passenger compartment behind the center console exactly where your radio is located.3Plug the OBD II plug in to the connection on the auto, following the manufacturer's instructions.4Turn the ignition on but tend not to get started the automobile. Turn it far sufficient to supply energy to every thing.
5Press the scan button on the scanner tool. This may let you know if there's anything wrong together with the vehicle. It's going to "throw" a code that you could look up in the booklet provided with all the tool.6Choose yes when the tool asks you if you want to clear codes auto diagnostic software. This can clear all codes and reset the check engine light.7Turn the crucial off, unplug the OBD II Tester and replace the panel you removed to access the panel.
Related articles:
没有评论:
发表评论